header_mobile
back to product overview

Analytical heating hose with constant power

HX3 series100°C/200 °C

The HX3 series analytical heating hoses with Ex heating conductor is designed for use in Ex areas. The heating hoses are above all characterised by their compact construction with connection configuration. The HX series heating hoses are tested to ATEX standards and with an EC type examination certificate they are certified for the entire heating hose. The specially structured HX3 series heating hoses can be used in temperature classes T1 ... T3 depending on the temperature control and are suitable for use in zones 1/2 (gas) and zones 21/22 (dust). Their operation in zones 0 and 20 is not permissible. The HX3 series analytical heating hoses are equipped with two EX-PT100 . PT100 Exi intrinsically safe are also optional. Applications: Maintaining temperature and avoidance of frost and condensation (motor exhaust fumes, CO 2 measurement, measuring samples, industrial gases, air & environmental measurements) in Ex areas.

Temperature classes T3=200°C
Ex areas Zone 1/2 (gas)
Zone 21/22 (dust)
Marking (Ex) I2G Ex eb IIC T1... T6
(Ex) II2D Ex tb IIIC T85°C... T450°C
(CE)0518
EC type examination certificate EPS 11 ATEX 1 341 X
Directive 94/9/EC, EN 60079-0, EN 60079-7, EN 60079-18
Operating temperature 200°C
Rated voltage 230 V AC
Power rating depending on the design of the nominal diameter
Connecting cable 1.0 m
Inner core DN 4-12 mm PTFE, PFA or VA, see Inner cores analytics
Connector fittings steel / stainless steel, RSL
Thermal insulation thermally stabilised, close-pore foam or thermal fleece
Outer protection antistatic, see Outer protection hoses
Hose end caps PA hard cap or elastomer cap
Option replaceable core

The temperature must be monitored with controllers dependent upon the temperature class.