back to product overview
Connection and termination set for parallel heat- ing systems in terminal technology for use in ex- plosive hazard areas
Type HBR-IAL8190 °C
The HBR-IAL8EX system includes a quick and simple to fit connection technology to connect the connecting cable and heating tape and termination based on a screw connection. The dimensions can be selected so the system can be accommodated beneath the thermal insulation. Neither a hot-air gun nor any other special tool is required for configuration.
- Temperature stability up to +190°C
- Current load capacity up to 20 A
- For parallel heating systems HBR-ILLw, ILH, ILS
- Very stable, as completely made of nickel-plated brass
- Compact dimensions
- Alternative: Low temperature version up to 135°C, only for HBR-ILLw heating tape
Self-configuration | |
190°C HBR-ILH/ILS | Type HBR-IAL8Ex-HKSS |
135°C HBR-ILL | Type HBR-IAL8Ex-MKSS |
Temperature class | T6 / T5 / T4 / T3 |
Terminal range for supply line | 7.0 - 10.5 mm |
Terminal range for heating conduc- tor | 4.7 x 10 - 6.5 x 13 mm |
Max. current load capacity | 20 A AC |
Measurement voltage | 12...400 V AC |
Terminal cross section | 2.5 mm² |
Protection type | IP65 |
Length connection/termination | 110 mm / 70 mm |
Diameter | 25 mm |
Weight connection/termination | 168 g / 116 g |
Material | Nickel-plated brass |
Marking | (Ex) II 2G Ex e IIC T6/T5/T4/T3 Gb (Ex) II 2D Ex tb IIIC T195°C Db IP65 |
Connecting cable Ex (option) by the metre | |
HBR-ALF-25 | 3 x 2.5 mm² 200 °C |
HBR-ALR-15 | 3 x 1.5 mm² 135 °C |
Further information: Please observe installation instructions!