Heating hose with inner heater

H 500 / HIF series100 °C

Temperature control using heating conductor with HTI controller

Applications: Heating low viscosity and gaseous media, such as water, oils, lyes, paints, acids or air.

The heating element inside the hose has direct contact with the media. This ensures optimum heat transfer.

This configuration means the heating hose has a small outer diameter and is very flexible.

No thermal insulation is required up to an operating temperature of 60°C.

Operating temperature	max. 100°C
Rated voltage	230 V AC
Rated power	approx. 60 W/m
Pressure hose type	PTFE DN 10 to 12 mm, T1 – T2
Connection fitting	AG or ½'' union nut
Connector head	stainless steel or galvanised steel / 100 bar pressure
Heating	PTFE heating conductor, insulated
Outer protection	stainless steel braiding from the main hose
Temperature sensor	ntegral control system (HTI)
Connecting cable	1.5 m
Plug connection	Plug for HTI controller
Fuse protection	on-site circuit breaker (optional ex works)
Production lengths	10, 20, 40, 70 m
Protection type	up to IP54 (EN 60529), protection class I
Tolerance	±5°C

Temperature control from our HTI-16 controller, see chapter Control
technology.

Other pressure hoses can be offered on request.