back to product overview
HIE inner heater for hoses and pipes
HIE-06 / HIE-16 series100 °C
The HIE inner heater is very well suited for pre-installed and hoses - the customer can simply insert the single wire heating conductor into them via a screw system and seal using a brass compression fitting. A T-junction is required.
Two versions of the HIE are available. HIE-6 with mini controller on the screw fitting for max. 1500 W / 230 V.
HIE-16 for a separate controller HTI-16 up to 3600 W / 230 V.
Operating temperature | max. 100°C |
Rated voltage | 230 V AC/DC (other voltages 115 to 400 V) |
Rated power | depending on configuration 5-70 W/m |
Heating conductor outer diameter | 2 - 5 mm |
Brass connector head | ½'' internal thread |
Pressure-resistant | up to 15 bar |
Temperature setting | 0 - 100°C on controller |
Temperature measurement | integral heating conductor HTI control system |
Plug connection | HIE-06: German "Schuko" mains plug HIE-16: plug for HTI-16 |
Production lengths | 3 - 100 m |
Connecting cable | 1.5 m |
Protection type | IP 42, cast IP 44, protection class I |
Operation of the HIE inner heater has to be protected with a circuit breaker. Temperature measurement using an integral controller, see chapter Control technology.
The HIE inner heater with mini controller can be used up to a length of max. 30 - 35 m.
The HIE-16 up to max. 100 m