back to product overview

Industrial heating hose with constant power

HX6 series200 °C

The industrial heating hose with HX6 series heating conductors is designed for use in Ex areas. The heating hoses are above all characterised by their compact construction with connection configuration. The HX series heating hoses are tested to ATEX standards and with an EC type examination certificate they are certified for the entire heating hose.

The specially structured HX6 series heating hoses can be used in temperature classes T1 ... T3 depending on the temperature control and are suitable for use in zones 1/2 (gas) and zones 21/22 (dust). Their operation in zones 0 and 20 is not permissible.

The HX6 series industrial heating hoses are equipped with two EX-PT100 sensors. PT100 Exi intrinsically safe are also optional.

Applications: Heat-loss free transport of: oil, grease, resin, tar, paint, water, carbon dioxide, plastic, moulding compounds etc. in Ex areas.

Temperature classes T3=200°C
Ex areas Zone 1/2 (gas)
Zone 21/22 (dust)
Marking (Ex) II2G Ex eb IIC T1... T6
(Ex) II2D Ex tb IIIC T85°C... T450°C
CE 2004
EC type examination certificate EPS 11 ATEX 1 341 X
Directive 2014/34/EU, EN 60079-0, EN 60079-7, EN 60079-18
Operating temperature 200 °C
Rated voltage 230 V AC
Power rating depending on the design of the nominal diameter
Connecting cable 1.0 m
Pressure hose see Industrial pressure hoses
Connector fittings steel / stainless steel, see Fittings
Thermal insulation thermally stabilised, close-pore foam or thermal fleece
Outer protection antistatic, see Outer protection hoses
Hose end caps PA hard cap or elastomer cap

The temperature must be monitored with controllers dependent upon

powered by webEdition CMS