header_mobile
back to product overview

Analytical sample gas lines with replaceable PTFE inner core and screwed fitting

H 300 C series250 °C

Application potential: Maintaining the temperature of probe lines for motor exhaust, CO2 measurements, industrial exhaust gasses, blast furnace exhaust gasses, air testing, etc. The special fittings made of 1.4571 steel prevent the movement or kinking of the PTFE core at the end of the analysis heating hose. A compression ring fitting can be attached. Strain relief is accomplished by way of the outer braid.

Operating temperature max. 100°C, 200°C, 250°C
Rated voltage 230 V AC/DC (other voltages up to 500 V)
Power rating Watt/metre, see type codes
Inner core DN 4 – 12mm PFA or PTFE. see Inner cores Analytical
Connection fitting RSL special fitting 1.4571 stainless steel, screwed without transition
Heating heating conductor, structure according to DIN, moisture-proof with PE conductor
Thermal insulation heat stabilized, closed-pore silicone foam, thermal fleece or elastomer foam
Outer protective braiding polyamide black, options - see Outer protection
Hose end caps PA hard cap or elastomer cap
Temperature sensor Fe-CuNi type J, NiCr-Ni type K, PT 100 and integral control system (HTI) possible
Connection cable 3 m
Plug connection according to specification
Production lengths up to 100 m
Ingress protection IP65 (EN 60529), protection class I
Tolerance ±10°C

Temperature control using our controllers, in chapter Control technology