Heating hose with integrated inner heat- er for drinking or waste water
HWI 19/25 series 80 °C
Frost protection hose for mobile water supplies in winter and under cold ambient conditions.
Applications Container settlements, stables, washing and cleaning plants, Christmas markets, catering, agriculture, road construction, construction sites.
The heating element of the HWI hose is located directly in the medium. This direct heating technique consumes a low level of energy. This hose no longer differs visibly or in its usage from an unheated hose. A mini- controller in its connector head keeps the temperature in the hose constant above freezing point. The water hoses are approved under BT-DVGW / KTW-A and may be used for drinking water applications. For service water applications, the HWI hose is also available without plastic - drinking water approval (KTW) and is thus more economical. The hose heater is to be connected by way of a fault current circuit breaker.
Operating temperature | -20 to +80°C |
Rated voltage | 230 V AC |
Rated power | depending on configuration 10 - 20 W/m |
Outer hose | drinking water hose with BT-DVGW / KTW-A approval EPDM - waste water hose without KTW |
Structure | smooth inside, outer surface is ozone and weather resistant |
Production lengths | 15 / 20 / 30 / 35 / 40 / 45 and 60 m |
Connector fittings | GEKA-plus in brass |
Pressure rating | max. 10 bar |
Smallest bend radius | 200 mm |
Dimensions ø | 19 or 25 mm, wall thickness approx. 4-5 mm |
Connecting cable | 1.5 m with German "Schuko" mains plug Optional: German "Schuko" mains plug with integrated fault current circuit breaker |
Regulation | Control HTI-6 mini-controller set to +10°C, other temp 0-80°C on customer request, see chapter Control technology |
Protection type | up to IP44 (EN 60529), protection class I |