Standard heating hose

H 100 / H 700 / H 200 / H 800 series250 °C

Applications: Heat-loss free transport of: oil, grease, resin, tar, paint, water, carbon dioxide, plastic, moulding compounds etc.

Deployable pressure hose made of PTFE of DN 4 – 50 mm; pressure load depending on the nominal diameter up to 600 bar

Operating temperature	H 100 100 °C - H 700 170 °C - H 200 200 °C - H 800 250 °C
Rated voltage	230 V AC/DC (other voltages up to 500 V)
Rated power	Watt/metre, see type codes
Pressure hose type	see Pressure hoses
Connection fitting	steel / stainless steel, see Fittings
Heating	heating conductor, structure according to DIN, moisture-proof with protective braiding
Thermal insulation	heat stabilized, closed-pore silicone foam up to 250°C elastomer foam up to 170°C
Outer protective braiding	polyamide, black, options possible
Hose end caps	PA hard cap or elastomer cap
Temperature sensor	Fe-CuNi type J, NiCr-Ni type K, PT100 and integral control system (HTI) possible
Connecting cable	1.5 m
Plug connection	round connector
Production lengths	from 0.3 to 50 m depending on DIN
Protection type	up to IP54 (EN 60529), protection class I
Tolerance	±10 °C

Temperature control using our controllers, in chapter Control technology. Extended usages according to customer requirements with special equipment possible.