back to product overview

Self-limiting heating conductor

HBR-ILS...(NF) type200 °C

HBR-ILS is a self-limiting heating conductor intended for industrial use for maintaining the temperature of e.g. pipes and conductors in which high temperature stability is an important factor.

This heating conductor can be cut to length in-situ for exact adaptation to the workpiece.

Under the respective worldwide standards, HBR-ILS is approved for use in explosion hazard and aggressive environments.

As a result of its self-limiting characteristic, the heating conductor cannot overheat even when overlaps exist in its placement. Its output power is limited in depending upon the temperature of the object.

HBR-ILS is quick and simple to install, it can be fit to size and attached without any special tools. Connection/termination and coupling components are available with explosion hazard area ratings.

Max. permissible temperature Switched on 200 °C / Switched off 250 °C
Minimum installation temperature -40°C
Voltage supply 220-240 V AC
Temperature classification T3 (200°C)
Maximum resistance of the protective braiding ≤ 18.2 Ohm/km

The maximum final temperature must be monitored with controllers dependent upon the application.

* approx. holding temperature depending on mounting position, insulation thickness and outer temperature on the pipe.

Accessories

Hillesheim offers a complete range of accessory parts, such as controllers, connection/termination sets, as well as the relevant connection housings. These items are recommended for trouble-free operation.

powered by webEdition CMS